When designing the shape of the die-casting mold, we need to pay attention to a lot of options, so what is the specific situation? Let’s get to know it together.
(1) The length and width of the mold should not interfere with the ejector pin;
(2) The total thickness of the mold should not be too thick or too thin, which exceeds the range that can be clamped by the die casting machine;
(3) Pay attention to the coordination with the material pipe or nozzle;
(4) When using the pull rod to pull back the ejection mechanism, pay attention to the matching of the size and position of the pull rod.
(5) In order to facilitate the transportation and assembly of the mold, screw holes should be drilled above and on both sides of the fixed mold and the movable mold, so that the eyebolts can be screwed in.
